- USB-CUSB-Type C Port
- Your Loki's USB port is for firmware updates. USB MIDI and preset transfer system will soon be implemented through the USB port.
- L / RStereo Connection
- To use Loki in stereo mode, connect the L and R inputs and outputs to the respective equipment in the signal chain.
- MONOMono Connection
- To use Loki in Mono mode, connect the instrument to Input-L and the amplifier or next pedal to Output-L. When only Input-L is connected, the signal is duplicated at Input-R, creating a stereo signal in the Loki Modulation.
- MIDIMIDI Input and Output
- The new MIDI system of the Gold Series follows the universal MIDI standard, using optocouplers. The connection is made via P2 connectors on the back of the pedal. If your controller does not have a P2 output, a cable will be needed to convert from DIN 5 pins to P2, following the indicated polarity.
- DC 9VPower
- The Loki Modulation requires an isolated 9 volt DC power supply, center negative, 2.1 x 5.5 mm barrel connector (the same as standard Boss connectors), which can supply 300 mA (milliamps) of current.